As an Amazon Associate I earn from qualifying purchases.

Updated November 2026

Shopping for the best manual trailer jacks comes down to matching capacity, lift height and mounting style to your trailer and how you use it. A tongue jack that is too weak for a loaded camper, or too short to clear your hitch, makes hooking up slow and unsafe. The picks below were selected by reviewing manufacturer specifications, brand reputation and the patterns owners commonly report, with a focus on rated capacity, vertical travel, mounting type and handle design. This is a research-based comparison, not a list of products we have personally run through a hookup routine.

Our top picks at a glance

  1. 1VEVOR 5000lbs A-Frame Trailer JackTOP CHOICEBest overallVEVOR 5000lbs A-Frame Trailer JackView on Amazon
  2. 2Top-Wind A-Frame Trailer Jack BJ-5000TW-1TOP CHOICEBest for heavy travel trailersTop-Wind A-Frame Trailer Jack BJ-5000TW-1View on Amazon
  3. 3Kohree 5000 lbs A-Frame Trailer Jack, 22.5" LiftingTOP CHOICEBest for tall tongue clearanceKohree 5000 lbs A-Frame Trailer Jack, 22.5" LiftingView on Amazon
  4. 4MaxxHaul 70159 14" Lift A-Frame Trailer JackBest for small utility trailersMaxxHaul 70159 14" Lift A-Frame Trailer JackView on Amazon
  5. 5Road DAWG A-Frame Trailer Jack ATR39004MBBest budget pickRoad DAWG A-Frame Trailer Jack ATR39004MBView on Amazon
  6. 6Kohree 2000 lbs Side Mount Trailer JackBest for side-mounted installsKohree 2000 lbs Side Mount Trailer JackView on Amazon
  7. 75-Level Drop Leg 5K Trailer JackBest for varied ride heights5-Level Drop Leg 5K Trailer JackView on Amazon

Our Top Picks

Quick Comparison

Product Best for Key feature
VEVOR 5000lbs A-Frame Trailer Jack Overall use on RVs and horse trailers 5-level drop leg, 15″ vertical travel, 9.8–32.5″ lift range
MaxxHaul 70159 14″ Lift A-Frame Trailer Jack Small utility and light trailers 2,000 lb capacity, top-wind handle
Top-Wind A-Frame Trailer Jack BJ-5000TW-1 Heavy campers and boat trailers 5,000 lb capacity, rectangular footpad
Kohree 5000 lbs A-Frame Trailer Jack, 22.5″ Lifting Tall tongue clearance 22.5″ lifting range, ergonomic handle
5-Level Drop Leg 5K Trailer Jack Adjusting to varied ride heights 5 drop-leg positions, 15″ lift
Road DAWG A-Frame Trailer Jack ATR39004MB Budget-minded campers 2,000 lb capacity, 14″ travel
Kohree 2000 lbs Side Mount Trailer Jack Side-mounted installations Bolt-on side mount, 90° swivel

VEVOR 5000lbs A-Frame Trailer Jack

Tongue Jack for RV, Utility, Horse and Yacht Trailers, 5-Level Adjustable Drop Leg Trailer Jack with Foot Plate & Handle VEVOR 5000lbs A-Frame Trailer Jack, 15" Vertical Travel, lift 9.8-32.5"

Tongue Jack for RV, Utility, Horse and Yacht Trailers, 5-Level Adjustable Drop Leg Trailer Jack with Foot Plate & Handle VEVOR 5000lbs A-Frame Trailer Jack, 15" Vertical Travel, lift 9.8-32.5"

View on Amazon

Best for: Overall use on RVs, horse trailers and yacht trailers that need a wide lift range.

This jack suits owners who tow a mix of trailer types and want one jack that covers a broad range of tongue heights. Its five-level drop leg lets you match the jack to the coupler height of different rigs.

Key specs

  • Rated capacity: 5,000 lbs
  • Vertical travel: 15 inches
  • Lift range: 9.8 to 32.5 inches
  • A-frame mount with foot plate and handle

Pros

  • Wide lift range covers most tongue heights
  • Five drop-leg positions for flexible setup
  • Foot plate helps keep the jack stable on soft ground

Cons

  • Heavier than lighter utility jacks, which adds to storage weight
  • Fully extended height requires checking that the drop leg is locked

Bottom line: A strong first choice for RV and horse trailer owners who want one jack that adapts to several tongue heights.

View on Amazon

MaxxHaul 70159 14″ Lift A-Frame Trailer Jack

MaxxHaul 70159 14" Lift A-Frame Mount Trailer Jack with Top Wind - 2000 lbs. Capacity

MaxxHaul 70159 14" Lift A-Frame Mount Trailer Jack with Top Wind – 2000 lbs. Capacity

View on Amazon

Best for: Small utility trailers and light campers with a 2,000 lb tongue weight range.

Owners with lighter trailers often want a simpler, lighter jack that does not add unnecessary bulk. This model is built around a 2,000 lb rating, which fits that class of load.

Key specs

  • Rated capacity: 2,000 lbs
  • Lift: 14 inches
  • A-frame mount with top-wind handle

Pros

  • Lighter weight than heavy-duty jacks
  • Top-wind handle is easy to operate
  • Appropriate capacity for small trailers

Cons

  • Not suited to heavy travel trailers or loaded boat trailers
  • Shorter lift range than the multi-level drop-leg models

Bottom line: A sensible match for owners of small utility or light camping trailers who do not need heavy-duty capacity.

View on Amazon

Top-Wind A-Frame Trailer Jack BJ-5000TW-1

Top-Wind A-Frame Trailer Jack with Rectangular Footpad | 5000 lb Manual Crank Tongue Jack | Great for RVs, Campers, Boats, Utility Trailers & More | BJ-5000TW-1 / RFP

Top-Wind A-Frame Trailer Jack with Rectangular Footpad | 5000 lb Manual Crank Tongue Jack | Great for RVs, Campers, Boats, Utility Trailers & More | BJ-5000TW-1 / RFP

View on Amazon

Best for: Heavy campers, boat trailers and utility trailers that carry a high tongue load.

This jack is aimed at owners whose tongue weight pushes past what a 2,000 lb jack can safely handle. The 5,000 lb rating and rectangular footpad give it more margin for heavier loads.

Key specs

  • Rated capacity: 5,000 lbs
  • A-frame mount with manual crank
  • Rectangular footpad

Pros

  • High capacity suits heavier trailers
  • Rectangular footpad spreads load on soft ground
  • Top-wind design is straightforward to use

Cons

  • Heavier than lower-capacity jacks
  • Owners report that footpads can sink on soft soil without a board underneath

Bottom line: Best suited to owners of heavy campers and boat trailers who need capacity above 2,000 lbs.

View on Amazon

Kohree 5000 lbs A-Frame Trailer Jack, 22.5″ Lifting

Heavy Duty RV Tongue Jack, Ergonomic Manual Handle for Horse, Utility, Yacht, Camping Trailer Kohree 5000 lbs A-Frame Trailer Jack, 22.5" Lifting, Adjustable Drop Leg

Heavy Duty RV Tongue Jack, Ergonomic Manual Handle for Horse, Utility, Yacht, Camping Trailer Kohree 5000 lbs A-Frame Trailer Jack, 22.5" Lifting, Adjustable Drop Leg

View on Amazon

Best for: Tall tongue clearance on RVs, horse trailers and yacht trailers that sit high on the hitch.

When a trailer needs a long lift to clear a truck hitch or reach a coupler, the extra 22.5 inches of lifting range is the main draw. The ergonomic handle is designed to reduce strain during cranking.

Key specs

  • Rated capacity: 5,000 lbs
  • Lifting range: 22.5 inches
  • Adjustable drop leg, A-frame mount

Pros

  • Long lifting range for tall hitch setups
  • Ergonomic handle reduces cranking effort
  • 5,000 lb rating suits heavier trailers

Cons

  • Long extension can reduce stability when fully raised
  • Heavier build adds storage and handling weight

Bottom line: Pick this for owners who need maximum lift height and have a heavy trailer.

View on Amazon

5-Level Drop Leg 5K Trailer Jack

5-Level Drop Leg,5K Jack for RV Trailer Boat 5000 lbs A-Frame Trailer Jack, 15" Lift, Adjustable Drop Leg

5-Level Drop Leg,5K Jack for RV Trailer Boat 5000 lbs A-Frame Trailer Jack, 15" Lift, Adjustable Drop Leg

View on Amazon

Best for: Owners who switch between different tow vehicles or trailers with varied ride heights.

A multi-position drop leg makes it easier to set the jack to the right height for each hookup, which is useful for households with more than one tow setup.

Key specs

  • Rated capacity: 5,000 lbs
  • Lift: 15 inches
  • Five drop-leg positions, A-frame mount

Pros

  • Five positions cover a range of coupler heights
  • 5,000 lb rating for heavier loads
  • Adjustable leg simplifies changing setups

Cons

  • Multiple leg positions mean more pins to check each time
  • Owners sometimes note the leg needs regular lubrication

Bottom line: A good fit for multi-vehicle households that need quick height changes.

View on Amazon

Road DAWG A-Frame Trailer Jack ATR39004MB

Road DAWG A-Frame Trailer Jack, 2,000 LBs Capacity, 14 Inches Vertical Travel, Top-Wind Handle Trailer Tongue Jack with Foot Plate, for Camper, RV,ATR39004MB

Road DAWG A-Frame Trailer Jack, 2,000 LBs Capacity, 14 Inches Vertical Travel, Top-Wind Handle Trailer Tongue Jack with Foot Plate, for Camper, RV,ATR39004MB

View on Amazon

Best for: Budget-minded campers with light to mid-weight trailers.

Owners who want a dependable manual jack for a small camper without paying for extra capacity will find this a practical match.

Key specs

  • Rated capacity: 2,000 lbs
  • Vertical travel: 14 inches
  • Top-wind handle with foot plate, A-frame mount

Pros

  • Straightforward top-wind operation
  • Foot plate adds stability on firm ground
  • Appropriate for light camping trailers

Cons

  • Lower capacity than heavy-duty alternatives
  • Not intended for heavy travel trailers

Bottom line: A sensible budget choice for light campers, provided the tongue weight stays within the 2,000 lb rating.

View on Amazon

Kohree 2000 lbs Side Mount Trailer Jack

Side Mount Bolt on, 11" Lift, Ergonomic Handle, Trailer Tongue Jack for RV, Boat, Utility Trailer, Black Kohree 2000 lbs Manual Trailer Jack, 6" Dual Wheel, 90° Swivel, Heavy Duty

Side Mount Bolt on, 11" Lift, Ergonomic Handle, Trailer Tongue Jack for RV, Boat, Utility Trailer, Black Kohree 2000 lbs Manual Trailer Jack, 6" Dual Wheel, 90° Swivel, Heavy Duty

View on Amazon

Best for: Side-mounted installations on utility trailers, boats and campers where an A-frame jack will not fit.

Side-mount jacks bolt to the trailer frame rather than the A-frame, which suits some tongue designs. The 90° swivel helps when space is tight.

Key specs

  • Rated capacity: 2,000 lbs
  • Lift: 11 inches
  • Side mount with 6″ dual wheel and 90° swivel

Pros

  • Bolt-on side mount suits many tongue styles
  • Swivel helps position the jack in tight spots
  • Ergonomic handle

Cons

  • Shorter lift than A-frame models
  • Capacity is limited to light trailers

Bottom line: Choose this if your trailer needs a side-mounted jack and your tongue load is light.

View on Amazon

Buying Guide

Rated capacity versus tongue weight

Match the jack’s rated capacity to the tongue weight of your loaded trailer, not the empty weight. Manufacturers specify a rated capacity that should not be exceeded, and many owners recommend staying well inside it for safety margin.

Good picks for this: Top-Wind A-Frame Trailer Jack BJ-5000TW-1, VEVOR 5000lbs A-Frame Trailer Jack

Lift range and vertical travel

Measure the height from the ground to your coupler, then compare it with the jack’s lift range. A jack with too little travel will not reach the hitch, while one with excess travel may be harder to stabilize at full extension.

Good picks for this: Kohree 5000 lbs A-Frame Trailer Jack, 22.5″ Lifting, 5-Level Drop Leg 5K Trailer Jack

Mount style: A-frame versus side mount

A-frame jacks attach to the tongue and are the most common style. Side-mount jacks bolt to the trailer frame and suit tongues that cannot accept an A-frame. Confirm your trailer’s mounting options before buying.

Good picks for this: Kohree 2000 lbs Side Mount Trailer Jack, MaxxHaul 70159 14″ Lift A-Frame Trailer Jack

Handle design and cranking effort

Top-wind handles let you crank from above, while side-crank designs can be easier in tight spaces. Ergonomic handles reduce wrist strain on repeated use. Owners who hook up often tend to value handle comfort more than they expect.

Good picks for this: Road DAWG A-Frame Trailer Jack ATR39004MB, Kohree 5000 lbs A-Frame Trailer Jack, 22.5″ Lifting

Footpad size and ground conditions

A wider footpad spreads the load on soft gravel or grass. Owners commonly report that a jack will sink on soft soil, so placing a sturdy board under the foot plate is a widely recommended precaution.

Good picks for this: Top-Wind A-Frame Trailer Jack BJ-5000TW-1, VEVOR 5000lbs A-Frame Trailer Jack

Durability and corrosion resistance

Check for a powder-coated or galvanized finish, sealed moving parts and a solid welded frame. Jacks that live outdoors in wet climates benefit from periodic cleaning and light lubrication of the lift mechanism.

Good picks for this: 5-Level Drop Leg 5K Trailer Jack, Kohree 2000 lbs Side Mount Trailer Jack

Weight, storage and handling

Heavier jacks add stability but are harder to remove and store. If you detach the jack after each trip, weigh its handling burden honestly before choosing a high-capacity model.

Good picks for this: MaxxHaul 70159 14″ Lift A-Frame Trailer Jack, Road DAWG A-Frame Trailer Jack ATR39004MB

FAQ

What is the difference between a tongue jack and a side mount jack?

A tongue jack, usually an A-frame style, attaches to the trailer tongue and raises or lowers the front of the trailer. A side mount jack bolts to the trailer frame and works on tongues that cannot accept an A-frame. Confirm which mount your trailer uses before buying.

How much capacity do I need?

Check the tongue weight of your loaded trailer and choose a jack rated above it. Light utility trailers often fit a 2,000 lb rating, while heavier campers and boat trailers usually need 5,000 lbs.

Can I leave the trailer on the jack while it is parked?

Manufacturers generally advise against relying on a jack as a long-term support. Use the jack to raise or lower the trailer, then place wheel chocks and, where appropriate, jack stands or other support for stability.

Why does my jack sink into the ground?

The footpad may be too small for soft soil. Owners often place a sturdy board or paver under the foot plate to spread the load and keep the jack level.

How do I maintain a manual trailer jack?

Clean dirt and road grime from the screw and gear housing, lubricate moving parts with a light grease as the manufacturer recommends, and check welds and mounting bolts before each trip.

Do I need to check the jack before every trip?

Yes. Before each tow, confirm the jack is fully retracted and locked, the handle is stowed, and the mounting hardware is tight. Inspecting the jack along with the hitch and safety chains is a good routine.

Should I consult a professional before installing a jack?

If you are unsure about mounting compatibility or your tongue weight, consult a trailer dealer or qualified technician. Installation errors can affect safe towing.

Conclusion

For most RV and horse trailer owners, the VEVOR 5000lbs A-Frame Trailer Jack offers a broad lift range that covers many tongue heights. Owners of heavy campers and boat trailers should look at the Top-Wind BJ-5000TW-1 for its higher capacity. Those needing extra clearance may prefer the Kohree 22.5″ lifting model. Small utility trailers suit the MaxxHaul 70159, while budget-minded campers may consider the Road DAWG ATR39004MB. Owners with side-mount tongues should choose the Kohree 2000 lb side mount. Always match rated capacity to your loaded tongue weight before buying.

Sources